Technical Overview of Pressure Vessel Steel Plate and Wear Resistant Steel Plates in Saudi Projects

Pressure vessel steel plate, forged in accordance with ASTM A516 Gr.60, Gr.65, and Gr.70 together with ASTM A387 alloy grades, keeps being the main component of refinery, petrochemical and power generation projects all over Saudi Arabia. These steel plates are suitable for moderate and high-temperature applications since they use low carbon content, good notch toughness and excellent weldability. Usually, the plates range in thickness from 6 mm up to more than 150 mm. For compliance with the ASME Section II and Section VIII design codes, the material is delivered either normalized or quenched and tempered. Nowadays, EPC contractors in the main industrial centers of Jubail and Dammam demand plate materials with full traceability, ultrasonic examination, and impact testing at specific temperatures.

PMI (Positive Material Identification) is carried out by checking material properties through tensile, yield strength, and charpy v-notch tests, especially for vessels operating in a cyclic pressure environment. On pipingmaterial.sa, buyers can find stockists with genuine pressure vessel grades offering customer-cut sizes, beveled edges, and lots with third-party inspection in accordance with Saudi Aramco material system requirements. The availability of products that are ready for delivery or have undergone mill test certification is more than ever important to Riyadh's shutdown operations and modular fabrication projects.

For those places where the surface gets worn out significantly due to sliding abrasion or handling of bulk materials, the designers most of the time decide to go for a switch in use Wear Resistant Steel Plates, viz. AR400, AR450, and AR500. Such plates at a hardness level of 360 to 550 HB and produced in quenched and tempered condition, are commonly chosen to manufacture liners, chutes, and dump truck bodies whose surface life is expected to be extended in severe wear conditions.  

Contact seller Share